Power Plant Pure Water Reverse Osmosis Equipment

The principle behind Jingbo's Power Plant Pure Water Reverse Osmosis Equipment is quite simple: it acts like a "super filter" for impurities in the water. High pressure forces raw water through an extremely fine reverse osmosis membrane, trapping salt, bacteria, and impurities, leaving only clean water. This filter is highly effective, removing over 98% of salt, resulting in exceptionally high water purity with a conductivity as low as 1 μS/cm. When combined with EDI technology, the water purity can reach over 18 MΩ·cm, fully meeting the high requirements of power plant boilers.

Product Parameters

Power plants consume large amounts of water, and downtime losses are substantial. Therefore, this equipment is either containerized or can be assembled on-site; although large, it is extremely compact. It is equipped with a fully automatic control system, requiring no dedicated personnel to monitor it. It automatically alarms for pressure and water quality issues and can perform self-flushing and maintenance, operating reliably 24/7.

Even more reassuring is that the Power Plant Pure Water Reverse Osmosis Equipment does not require acid or alkali regeneration and does not discharge polluted wastewater, fully meeting the requirements of green production. The inlet water pressure is only 1.0 to 1.6 MPa, and energy consumption is significantly lower than older equipment. Whether it's feedwater for high-pressure boilers or cooling water for steam turbine units, treatment with this equipment prevents scaling and corrosion at the source, ensuring the safe, stable, and efficient operation of power plant units.